1. Home
  2. BAG FILTERS

BAG FILTERS

Model "Cologno"

From 15 to 40 m³/h

Specific for district heating networks primary and secondary circuits as well as traditional condensation boilers power plants switch. Its use is to clean the dirt and particles inside old pipes and open vessel.
It is also used to preserve plate heat exchangers while maintaining the system efficiency, for a better management of the network in terms of return temperatures and flow rate. 18 models were developed from 15 to 40 m³ / h in nominal capacity.
PN 10, PN16 and PN 25 for hot water and 135°C for superheated water.
4 filtration levels (Super Soft, Soft, Medium, Hard) up to 0,5 micron.
Measurement system for pressure and optional clogging remote monitoring.
CE / PED Certification

Our models

Hot Water , Heating

Pos.

Model

Power
(kW)

DN 1°
(in/out)

DN 2°
(in/out)

PN 1°
(bar)

PN 2°
(bar)

Tmax 1°
(°C)

Tmax 2°
(°C)

Dimensions
(mm)

Weight
(kg)

310

COLOGNO 15C 10

15.00

65-65

-

10.00

0.00

110

0

20

38

311

COLOGNO 15C 16

16.00

65-65

-

16.00

0.00

110

0

20

40

312

COLOGNO 15C 25

25.00

65-65

-

25.00

0.00

110

0

20

42

Pos.

Model

Power
(kW)

DN 1°
(in/out)

DN 2°
(in/out)

PN 1°
(bar)

PN 2°
(bar)

Tmax 1°
(°C)

Tmax 2°
(°C)

Dimensions
(mm)

Weight
(kg)

313

COLOGNO 25C 10

10.00

80-80

-

10.00

0.00

110

0

55

68

314

COLOGNO 25C 16

16.00

80-80

-

16.00

0.00

110

0

55

70

315

COLOGNO 25C 25

25.00

80-80

-

25.00

0.00

110

0

55

72

Pos.

Model

Power
(kW)

DN 1°
(in/out)

DN 2°
(in/out)

PN 1°
(bar)

PN 2°
(bar)

Tmax 1°
(°C)

Tmax 2°
(°C)

Dimensions
(mm)

Weight
(kg)

316

COLOGNO 40C 10

10.00

100-100

-

10.00

0.00

110

0

80

93

317

COLOGNO 40C 16

16.00

100-100

-

16.00

0.00

110

0

80

95

318

COLOGNO 40C 25

25.00

100-100

-

25.00

0.00

110

0

80

97

Pos.

Model

Power
(kW)

DN 1°
(in/out)

DN 2°
(in/out)

PN 1°
(bar)

PN 2°
(bar)

Tmax 1°
(°C)

Tmax 2°
(°C)

Dimensions
(mm)

Weight
(kg)

319

COLOGNO 15S 10

10.00

65-65

-

10.00

0.00

140

0

20

38

320

COLOGNO 15S 16

16.00

65-65

-

16.00

0.00

140

0

20

40

321

COLOGNO 15S 25

25.00

65-65

-

25.00

0.00

140

0

20

42

Pos.

Model

Power
(kW)

DN 1°
(in/out)

DN 2°
(in/out)

PN 1°
(bar)

PN 2°
(bar)

Tmax 1°
(°C)

Tmax 2°
(°C)

Dimensions
(mm)

Weight
(kg)

322

COLOGNO 25S 10

10.00

80-80

-

10.00

0.00

140

0

55

68

323

COLOGNO 25S 16

16.00

80-80

-

16.00

0.00

140

0

55

70

324

COLOGNO 25S 25

25.00

80-80

-

25.00

0.00

140

0

55

72

Pos.

Model

Power
(kW)

DN 1°
(in/out)

DN 2°
(in/out)

PN 1°
(bar)

PN 2°
(bar)

Tmax 1°
(°C)

Tmax 2°
(°C)

Dimensions
(mm)

Weight
(kg)

325

COLOGNO 40S 10

10.00

100-100

-

10.00

0.00

140

0

80

93

326

COLOGNO 40S 16

16.00

100-100

-

16.00

0.00

140

0

80

95

327

COLOGNO 40S 25

25.00

100-100

-

25.00

0.00

140

0

80

97

Strength

range and performancesrange and performances

  • All models can work continuously with water fluid network, max 120°C (Thermal peak 150°C).
  • 18 models for hot and superheated water networks with flow rate from 15 to 40 m³/h.
  • Easy to replace and clean bag filter.
  • Developed to prevent fouling of heating exchanger, to prolong the life of heat exchanger and make the system more efficient.
  • Suitable for cleaning heating circuits as an alternative to chemical washes.
  • Is possible to have a permanent installation on Amarc DHS substations.
  • Three different levels of filtration: SOFT, MEDIUM, HARD through socks in polyester felt reinforced.

constructionconstruction

  • Drain tap and air oulet.
  • According to UNI8863 filters are in carbon steel.
  • The inner drum is made in inox AISI 304.
  • Thread UNI338 or WN flange in/out connections in accordance with UNI legislation .
  • Every filter has 3 anti-vibration legs.
  • Specific clamp bolts easy to close even without specific tools.
  • complete with automatic outlet and drainage ball valve located on bottom.
  • two input to monitor the fouling state of the inner bag filter.
  • Included accessories: flexible couplings, valves, filter bags kit.
  • The seal of the top cover can be in NBR or EPDM.
  • Amarc DHS components supplier: ALFA LAVAL (heat exchangers) | SIEMENS (heat meters, regulation valves, actuators) | KAMSTRUP (heat meters) | KSB (valves and check valves) | NAVAL OY (ball valves) | IVR (shut-off valves) | CALEFFI (security valve) | SAMSON (self-operated valves) | SALMSON (pumps) | HONEYWELL (actuators, 2-3 port valve)

managementmanagement

  • Ready for optional measuring device that not only allows for reading filter upstream and downstream pressures, but also that sends a clean signal to an optional remote control system for fouling indication.

special functions and servicesspecial functions and services

  • Amarc DHS filter bags are the result of accurate study to meet the needs of cleaning and decontamination of district heating system. Bag filter are designed to be able to operate continuously for long periods on both circuits for hot and superheated water circuits.
  • For each version of filter (15, 25, 40) are three types of filtering bag, each with a different capacity of filtration.
  • All bag filter are 100% polyester.

Working condition

  COLOGNO 15 COLOGNO 25 COLOGNO 40
HOT WATER MECHANICAL DESIGN   95°C PN 10/16/25  
SUPERHEATED WATER MECHANICAL DESIGN   135°C PN 10/16/25  
NOMINAL FLOW RATE 15 m³/h 25 m³/h 40 m³/h
NOMINAL CONDITIONS LOAD LOSS WITH SOFT/MEDIUM/HARD FILTERING BAG 0,35/0,41/2,20
(m c.a.)		 0,37/0,40/1,80 0,32/0,36/1,20
(m c.a.) (m c.a.)
SOFT/MEDIUM/HARD FILTRATION RANKING   50 µm / 10 µm / 1 µm  
FOULING PSH deltaP INTERVENTION   0,5 / 1,0 / 2,3 (m.c.a.)  
SEEPING SURFACE 0,25 m² 0,45 m² 0,65 m²
TANK CONSTRUCTION MATERIAL Carbon Steel painted UNI 8863 / ASTM A 106
BASKET CONSTRUCTION MATERIAL AISI 304 Stainless Steel
FILTERING BAG MATERIAL Polyester Fabric